• -R69.90
Remzibi OSD 3DR

Remzibi OSD 3DR

MUL-00229
Last items in stock
R629.10 R699.00 -R69.90
Tax included
Time left

  Secure Checkout

Pay via Card, Zapper or Bank Transfer.

  Free Delivery over R750

To your door delivery. Main Centres Only.

  Guaranteed Customer Support

Need help? See our Support Page.

Description

DIYDRones Remzibi's OSD is an On-Screen-Display unit that is used along with a video transmitter and video receiver on First-Person-View setups for Remote Control planes.

First-Person-View gives you a view from inside the cockpit of the R/C plane. If you connect video goggles or a monitor/TV to the output of the Video Receiver, you can actually see as if you were sitting inside the plane.

Here's where Remzibi's OSD comes into play. The OSD is connected between the video camera and the video transmitter and adds information using a video overlay processor on to the video image. It's somewhat similar to watching CNN where they have the text scrolling along the bottom of the screen... or any network show you watch will frequently have their station logo at the bottom right. This is an overlay. It's adding information to the picture displayed by the camera.

Remzibi's OSD board uses a GPS module to capture information like heading, speed, altitude and lat/long coordinates. In addition, it uses an ATMEL processor to capture information like battery voltage (video and main/motor) and other functions like Variometer which shows up and down changes in altitude. All of this information is updated in real-time and placed over the camera's picture and fed into the Video Transmitter, sent back to the ground where it is captured by the Video Receiver and then output to goggles or a monitor where you (the R/C pilot) sees the camera video with the overlayed data.

Features
  • PC connection for configuration/calibration purposes using dedicated PC program
  • No need for a free channel on your receiver for OSD to function
  • GPS detection and configuration automaticaly
  • Home autosave function configurable based on number of satelites - button "save home" works independently
  • Metric(km/h) or feet(MPH) units - configurable
  • Zero altitude to airfield level - configurable
  • Fully configurable screen layout (no more cropped off data around the screen border like some other OSD's)
  • Graphical symbols and fonts configurable (Font editor for creating your own symbols and characters)
  • Voltages calibration function and all ADC inputs including alarms
  • Frequency calibration for Hz or RPM (gain definable)
  • PC configuration software includes GPS emulator for testing and setup purposes
  • Language Editor - Currently available in English, Polish and French. Simple to use langauge editor can be used to translate to any other language
  • Board measurements: 1.6 in x 1.1 in ( 4cm x 2.7cm)

Specifications:

  • Supply power requirement: 7V-14V (ie: 2S or 3S Lipo)
  • Video voltage measurment range 0-15V
  • Engine(ENG) voltage measurment range 0-30V
  • General purpose ADC measurment - Build your own or use off the shelf components for many advanced readings - ie. Temperature, Amps, Air Speed, Prop Speed, RSSI, etc.
  • Video signals - standard PAL or NTSC
  • GPS - any GPS 5V supply with NMEA protocol with TLL standard TX RX signals (however best results and advantages are with dedicated GPS module working 5Hz update position)
  • Weight : 16 gram (OSD + dedicated GPS)
  • Printed OSD board 20mm x 45mm (0.78" x 1.77")

Product Details

1 Item
Product added to wishlist

We use cookies to offer you a better experience and analyse site traffic.

By continuing to use this website, you consent to the use of cookies in

accordance with our Privacy policy.