Anycubic Standard Resin V2 – Clear 1kg

Create detailed, accurate and more durable resin prints with Anycubic Standard Resin V2 – Clear, an improved 405nm UV photopolymer resin developed for high-quality LCD and DLP resin 3D printing.

Standard Resin V2 combines enhanced toughness, low viscosity, reduced brittleness and high dimensional accuracy, making it an excellent everyday resin for models, prototypes, figurines, enclosures, decorative parts and detailed transparent or translucent designs.

With a viscosity of just 250–350 mPa·s at 25°C, the resin flows efficiently during printing, helping bubbles escape quickly while supporting fine detail reproduction and reliable printing. Its 25–30% elongation at break and 192 J/m Izod impact strength provide improved toughness compared with more brittle conventional standard resins.

Clear Resin for Detailed 3D Prints

The Clear colour is ideal for projects where you want light transmission or a transparent/translucent appearance rather than an opaque finish.

It is well suited to:

• Transparent and translucent models

• Display pieces

• Detailed prototypes

• Figurines and miniatures

• Decorative components

• Concept models

• Enclosures

• Functional prototypes

• Lighting and visual-effect projects

• General-purpose resin printing

The final clarity of a printed model can vary depending on layer lines, model geometry, washing, curing and surface finishing.

Improved Toughness & Impact Resistance

Traditional standard resins can produce excellent detail but may be relatively brittle.

Anycubic Standard Resin V2 has been formulated to provide improved toughness and impact resistance, giving finished models greater resistance to accidental knocks and drops.

With an elongation at break of 25–30% and Izod impact strength of 192 J/m, Standard Resin V2 provides a useful balance between rigidity and toughness for everyday resin printing.

This makes it suitable for more than just display models – it can also be used for prototypes and components where additional durability is useful.

High Precision & Dimensional Accuracy

Accurate resin printing depends on controlling material shrinkage during curing.

Anycubic Standard Resin V2 has a specified volume shrinkage rate of approximately 4.3–5.6%, helping produce detailed models with predictable dimensions and reduced unwanted deformation.

Combined with its controlled curing characteristics, the resin is suitable for detailed models, prototypes and components where accurate geometry matters.

Low-Viscosity Formula

With a viscosity of approximately 250–350 mPa·s at 25°C, Standard Resin V2 flows easily across the resin vat.

Lower viscosity helps resin refill the printing area efficiently between layers and allows trapped bubbles to dissipate more easily.

This can contribute to:

• Cleaner surface finishes

• Better detail reproduction

• Efficient resin flow

• Easier printing

• Reduced bubble-related imperfections

• Easier post-print cleaning

Excellent Detail Reproduction

Standard Resin V2 is designed to reproduce fine features and smooth surfaces, making it an excellent general-purpose resin for high-resolution LCD resin printers.

Whether you're producing intricate figurines, detailed prototypes or decorative objects, the resin provides the precision required to capture small features in your original 3D model.

Reliable Build Plate Adhesion

Reliable first-layer adhesion is critical to successful resin printing.

Anycubic Standard Resin V2 is formulated to provide dependable adhesion to the build platform when used with appropriate printer settings, helping reduce failed prints caused by models separating from the build plate.

For best results, always use exposure and bottom-layer settings appropriate for your specific resin printer.

Compatible with 405nm LCD & DLP Resin 3D Printers

Anycubic Standard Resin V2 provides broad compatibility with 405nm UV-curing LCD and DLP resin 3D printers.

While it is optimised for Anycubic's Photon-series resin printers, it can also be used with compatible 405nm resin printers from other manufacturers.

This makes Standard Resin V2 a versatile choice for users operating different resin printing platforms.

Optimised for Anycubic Photon Workshop

Anycubic's Photon Workshop slicing software includes pre-configured profiles for Anycubic resin products, helping simplify printer setup when using compatible Anycubic machines.

Instead of starting from scratch with exposure settings, users can select appropriate profiles and then fine-tune them where necessary for their particular printer and printing environment.

Low-Odour Formula

Anycubic Standard Resin V2 has been developed with a low-odour formulation to create a more comfortable resin printing environment compared with stronger-smelling formulations.

As with all photopolymer resin, it should still be handled according to the manufacturer's safety instructions and used in an appropriately ventilated workspace.

Easy IPA Cleaning

After printing, models can be cleaned using 95% isopropyl alcohol (IPA) to remove uncured resin from the surface.

Anycubic specifies a washing duration of approximately 3 minutes or longer, depending on the model.

After washing and drying, models should be post-cured using an appropriate 405nm UV curing system.

Key Features

• Clear Standard Resin V2

• 1kg bottle

• Improved toughness compared with conventional brittle standard resin

• 25–30% elongation at break

• 192 J/m Izod impact strength

• High-detail reproduction

• Low-viscosity 250–350 mPa·s formula

• Volume shrinkage rate of approximately 4.3–5.6%

• Good dimensional accuracy

• Smooth surface finish

• Reliable build plate adhesion

• Low-odour formulation

• Compatible with 405nm LCD/DLP resin printers

• Optimised profiles available through Anycubic Photon Workshop

• Cleanable with 95% IPA

• Suitable for prototypes, figurines, models and decorative prints

Specifications

Brand: Anycubic
Product Name: Anycubic Standard Resin V2
Colour: Clear
Product Weight: 1kg
Material: Photopolymer Resin
Compatible Printing Technology: LCD / DLP Resin 3D Printing
Compatible Wavelength: 365–405nm
Recommended UV Printing Wavelength: 405nm
Viscosity: 250–350 mPa·s at 25°C
Density: 1.05–1.25 g/cm³
Hardness: 80–83 HD
Tensile Strength: 35–45 MPa
Elongation at Break: 25–30%
Flexural Strength: 40–50 MPa
Flexural Modulus: 1500–2100 MPa
Young's Modulus: 1200–1400 MPa
Izod Impact Strength: 192 J/m
Volume Shrinkage Rate: 4.3–5.6%
Print Environment: 20–40°C
Print Temperature: 20–50°C
First-Layer Exposure: Approx. 20–40 seconds
Normal Exposure: Approx. 2.5–3 seconds
Cleaning: 95% IPA
Recommended Washing Time: ≥3 minutes
Post-Curing Wavelength: 405nm
Recommended Curing Temperature: 18–30°C
Recommended UV Intensity: 25,000–30,000 µW/cm²
Recommended Curing Time: Approx. 3 minutes

Exposure and curing settings are general manufacturer specifications and may require adjustment depending on your printer, layer height, ambient temperature and model.

Recommended Applications

Anycubic Standard Resin V2 Clear is ideal for:

• Figurines and miniatures

• Detailed models

• Transparent/translucent designs

• Decorative pieces

• Display models

• Concept models

• Prototypes

• Enclosures

• General-purpose resin printing

• Detailed hobby projects

Before Printing

Shake the resin thoroughly before use to ensure the material is properly mixed.

For best results, ensure the resin vat, release film and build platform are clean and in good condition before beginning a print.

Always select exposure settings appropriate for your specific resin printer rather than assuming one exposure time will produce identical results across every machine.

Post-Processing

After printing:

1. Remove the finished model from the build platform using appropriate tools.

2. Wash the model thoroughly in 95% IPA to remove uncured surface resin.

3. Allow the model to dry completely.

4. Post-cure using an appropriate 405nm UV curing system according to the recommended settings for the model and equipment.

Always follow the manufacturer's resin handling and post-processing instructions.

What's in the Box?

• 1 x Anycubic Standard Resin V2 – Clear 1kg

Why Choose Anycubic Standard Resin V2 Clear?

Anycubic Standard Resin V2 Clear is an excellent general-purpose resin for users who want more than fine detail alone.

Its combination of 25–30% elongation at break, 192 J/m impact strength, low 250–350 mPa·s viscosity and controlled 4.3–5.6% volumetric shrinkage provides a useful balance between toughness, printability and dimensional accuracy.

The Clear colour also opens up applications where light transmission and a transparent or translucent appearance are desirable.

For makers looking for a clear 405nm resin for detailed models, prototypes, figurines and general-purpose LCD/DLP 3D printing, Anycubic Standard Resin V2 offers a versatile balance between detail, toughness and ease of printing.